ETMX is still looking good and there's no rubbing seen. I've taken transfer functions for M0 and R0 this morning with everything in its nominal state (ISI floating, very in vacuum) (except OPTICALIGN OFFSET sliders OFF).

Settings:
- ETMX in HEALTH_CHECK
- DAMP OFF
- ALIGNMENT OFFSETS OFF
- In VAC
- HPI/ISI nominal

Comparison Results:
/ligo/svncommon/SusSVN/sus/trunk/QUAD/Common/Data/allquads_2026-09-08_ETMXRubbingCheck_ALL_TFs.pdf
/ligo/svncommon/SusSVN/sus/trunk/QUAD/Common/Data/allquads_2026-09-08_ETMXRubbingCheck_ALLM0_TFs.pdf
/ligo/svncommon/SusSVN/sus/trunk/QUAD/Common/Data/allquads_2026-09-08_ETMXRubbingCheck_ALLR0_TFs.pdf

/ligo/svncommon/SusSVN/sus/trunk/QUAD/Common/Data/allquads_2026-09-08_ETMXRubbingCheck_ALL_ZOOMED_TFs.pdf
/ligo/svncommon/SusSVN/sus/trunk/QUAD/Common/Data/allquads_2026-09-08_ETMXRubbingCheck_ALLM0_ZOOMED_TFs.pdf
/ligo/svncommon/SusSVN/sus/trunk/QUAD/Common/Data/allquads_2026-09-08_ETMXRubbingCheck_ALLR0_ZOOMED_TFs.pdf
r13142

M0
Data:
/ligo/svncommon/SusSVN/sus/trunk/QUAD/H1/ETMX/SAGM0/Data/2026-09-08_1600_H1SUSETMX_M0_WhiteNoise_{L,T,V,R,P,Y}_0p01to50Hz.xml
r13141
Results:
/ligo/svncommon/SusSVN/sus/trunk/QUAD/H1/ETMX/SAGM0/Results/2026-09-08_1600_H1SUSETMX_M0_ALL_TFs.pdf
r13141

R0
Data:
/ligo/svncommon/SusSVN/sus/trunk/QUAD/H1/ETMX/SAGR0/Data/2026-09-08_1715_H1SUSETMX_R0_WhiteNoise_{L,T,V,R,P,Y}_0p02to50Hz.xml
r13140
Results:
/ligo/svncommon/SusSVN/sus/trunk/QUAD/H1/ETMX/SAGR0/Results/2026-09-08_1715_H1SUSETMX_R0_ALL_TFs.pdf
r13140