Richard, Jonathan, EJ, Erik, Fil, Dave:
First thing this morning we did a round of h1seih16 power cycling, with Richard power cycling the IO Chassis. The models ran for about 5 minutes this time and then ADC1-timed-out like before.
Then we power cycled the CPU only, and this time the IOP would not run because of a card count issue. And indeed, both showcards and lscpi report that the A2-slot4 is empty, which contains the second 16bit-DAC card.
So we are operating under the theory that all the recent problems have been caused by a flakey DAC1, manifesting as ADC1 timing errors. We are preparing to replace DAC1.
Card 2
Extender 1
slot 1: (10ee d8c6) Xilinx Corporation,LIGO Timing Board
slot 2: empty
slot 3: (10b5 3101) PLX Technology, Inc.,General Standards 16AI64
slot 4: (10b5 3120) PLX Technology, Inc.,General Standards 16AO16
Card 3
Extender 2
slot 1: (10b5 3101) PLX Technology, Inc.,General Standards 16AI64
slot 2: (10b5 3101) PLX Technology, Inc.,General Standards 16AI64
slot 3: (10b5 3101) PLX Technology, Inc.,General Standards 16AI64
slot 4: empty <<< Should be 16AO16 DAC1 <<<<
Card 4
Extender 3
slot 1: (10b5 3101) PLX Technology, Inc.,General Standards 16AI64
slot 2: (10b5 3101) PLX Technology, Inc.,General Standards 16AI64
slot 3: empty
slot 4: empty
Card 5
Extender 4
slot 1: (1221 8682) Contec Co., Ltd,Digital I/O DIO-64
slot 2: (1221 8682) Contec Co., Ltd,Digital I/O DIO-64
slot 3: empty
slot 4: empty
Opened WP13616 to cover this work.
Fil is replacing the second 16bit-DAC.
second 16bit-DAC:
At time of writing, h1seih16 has been running for 30mins.