Tony, Camilla. WP 13621

Yesterday we removed the high-res/PCAL camera housing D1500073 from the x-arm adapter plate (A-1C VP2). Approved ECR for this work: LIGO-E2600291.

First we undid the thumb screw and slid off the cover, then we unscrewed the housing. Unplugged cable labeled H1:ITMX_DIGITAL_CAMER_12V photo, will check-in with EE team about this. The ring to keep the housing in place is around the VP, can be removed with VP. It has been covered with a yellow VP cover and a clear plastic guillotine is in place. Currently it's on the floor nearby but we plan to move the assembly to the VAC lab / PCAL lab on top of one of the cabinets.