FAMIS81871, last checked in alog91654.

For measurements below, measuring from the "top" of the red float ball.

• TCSx Chiller:  Had level of 28.3 cm.  Added 770mL to reach 30.5cm.
  • This was almost at the level noted in the procedure of < 28.0cm, but it has been almost a month since the last time these were topped off.
• TCSy Chiller:  Had level of 9.3 cm.  Added 400mL to reach 10.7cm.
  • When I first started to add water, the level quickly dropped by ~half a cm, I had checked beforehand to make sure the filter was off level so that there was no seal. After a few hundred mL it shot back up by that half a cm, which led me to overfill by 0.2 cm.  
• There was no water in the small cup under the slow leak, just some spots of leftover glycol.