(Corey, Doug C., Eric, Jim, Ken, Mike V., Rich M., Vincent)

BSC#1

• Cables were dressed.
• Sensors were aligned
• Testing crew has taken over.

For all intents and purposes, Assembly work is complete on BSCISI#1 (There are just a few remaining items related to the Vertical GS-13's which need to get installed).

BSC#2

• Top-facing Optics Table Plate had helicoils and dowel pins installed on its underside
• Bottom-facing Optics Table was flipped.  (modified flipping harware was used, and THIS TIME, the plate hung close to level.

Subassemblies:

• Small Actuators:  COMPLETE
• Large Actuators:  COMPLETE
• Lockers (both sets):  COMPLETE