Jim and I are changing the EPICS gateway configuration as specified in WP4404.  This involves changing the user environment to use EPICS_CA_ADDR_LIST for CA broadcast as opposed to routing through the EPICS gateway.  The gateway processes will remain in place for the vacuum controls (which do not have a default route, and therefore don't support this), and for the FE network to support the EDCU.  The unused gateway processes will be decommissioned.

NOTE:  Once the gateway processes are stopped, you will need to re-launch MEDM, etc. from a new shell to pick up the environment changes.  (The simplest method is to log out, then log back in.  This ensures you are not left with anything 'stale' on the desktop.)