Because Stefan jinxed me, the opsws1 crashed while I was on the last few super-long data points of the H1 SUS BS and H1 SUS PRM M2 L to M3 PY TFs that I'd been running all evening. Curses.

I've restarted the transfer functions, after rebooting the computer and clearing all relevant test points. I've also started them with a more limited range (from 0.2 to 5 [Hz] instead of 0.1 to 10 [Hz]) and reduced the number of data points (from 128 to 111). These were started around 12:30 am local time.

In case these new templates fail again, the amplitude envelop I'm using is
Freq [Hz]      PRM [ct]      PR2 [ct]      BS [ct]
0.1             3e5           3e6           2e4
0.2                                         2e4
0.3             3e5           3e6           5e3
0.5             1e5           1e6           1e3
0.7             2e5           1e5           6e3
1.0             5e4           1e5           3e4
2.0             1e5           1e6           1e5
5.0             1e5           1e6           1e6
10.             5e5           5e6           1e6  
15                                          5e6
20.             5e5           5e6           5e6

Drive Channels
H1:SUS-PRM_M2_LOCK_L_EXC
H1:SUS-PR2_M2_LOCK_L_EXC
H1:SUS-BS_M2_LOCK_L_EXC

Witness Sensors:
PRM: REFL WFS A DC, Pitch and Yaw
H1:ASC-REFL_A_DC_PIT_OUT
H1:ASC-REFL_A_DC_YAW_OUT
PR2: M3 OSEMs, Pitch and Yaw
H1:SUS-PR2_M3_WIT_P
H1:SUS-PR2_M3_WIT_Y
BS: Optical Lever, Pitch and Yaw
H1:SUS-BS_M3_OPLEV_PIT_OUT
H1:SUS-BS_M3_OPLEV_YAW_OUT