(Corey, Eric, Mike V., Jim)

Plate Shuffling

Thought we could work on the Stage1 floor on the Assembly Stand, but since we need to install Ballast Weights under it, it wasn't going to work.  So this plate was moved onto the Granite Table (where the Stage2 Midplate was....Stage2 Midplate was moved on to the Assembly Stand).

Stage0 Assembly

5/8" bolts were torqued down (once we received a Class-B-ed socket).

Stage1 Assembly

After the Stage1 Floor was moved onto the granite table, the walls were installed.  This assembly was then installed on to the top facing Optics Table plate.

Stage2 Assembly

Tried to be clever and pre-assemble the inner hex walls on this plate while it was on the Assembly Stand, but we discovered these walls cover up holes for other bolts we need to get to later, so the inner hex was disassembled.