(Corey, Eric, Jeff, Jim, Mick V.)

Stage2 Work

After part of Stage1 was put on the Optics Table, continued to build up Stage2.  The Mid-Plate was installed, Upper Hex Assembly installed, and then we moved back to Stage1 work....

Stage1 Work

After the Stage2 Mid-Plate/Upper Hex Assembly was installed, the Stage1 Close-out Plate & Close-Out Plate Cover were installed (still need to put in bolts and torque the latter).

Subassembly Status

• Small (stage 1-2) Actuators:  COMPLETE
• Large (stage 0-1) Actuators:  COMPLETE
• Small (stage 1-2) Lockers:  COMPLETE
• Large (stage 0-1) Lockers:  COMPLETE
• Flexures (stage 0-1):  COMPLETE
• Flexures (stage 1-2):  COMPLETE
• Sensors (stage 1-2):  currently being built
• Sensors (stage 0-1):  currently being built

Misc.

Top-Facing Keel plate was put on the Granite Table (lots of helicoiling for it!)