(Gerardo and Margot)
ITM03 and ITM11 have both ears bonded on, and are back in their cake tins for curing.
ITM03 S1 also had its fc pulled, and coating inspected as seen in T1400043. A “ thick balanced layer” was re-applied to face, leaving a small part at 12 o’clock position off for welding alignment. 
Pulled PEN-ETM08 out and staged, will get at least one ear onto it tomorrow morning (friday). 
CP05: Fiducial measurement staged and completed (had to get granite table moved to bonding lab, and equipment set up etc.) Left CP05 in flipper under flow bench for getting its prisms on next week. Measurements are on the dcc under E1400054.  
LHO large optics inventory: Went through cabinets here, then updated nebula location and install vs spare status for CPs, ITMs, LHO PEN-ITMs, LHO PEN-ETMs, SRMs, SR2s, PRMs, and PR2s.