aLIGO LHO Logbook

H1 ISC

kiwamu.izumi@LIGO.ORG - posted 17:13, Monday 10 February 2014 - last comment - 07:27, Tuesday 11 February 2014(9963)

preparation for h1oaf model

I was on a mission of figuring out what we need to get done for running the OAF (Online Adaptive Filtering) model. I started the mission from simply copying Livingston's model. It seems that there are many things to be done mainly on some other models e.g. HEPI, ISI and PEM models.

Here are the items we have to do to get the model fully compiled:

A model, called h1pemcs, needs to be newly created.
h1pemex and h1pemey need to have RFM blocks to send some signals to h1oaf
All the ISI models need to have PCIe blocks to send the GS13 signals to h1oaf
h1hpibs needs to have a couple of PICe blocks
We need to copy some c-coded stuff from /isc/l1/src/

Comments related to this report

jeffrey.kissel@LIGO.ORG - 07:27, Tuesday 11 February 2014 (9971)SEI, SUS

Link

All ISIs already are sending out their final stage's GS13s for general consumption. However, we should check what LLO does with these signals before just blindly copying -- if it's just to calibrate and project into the suspension point basis, then it will be redundant with what's already done in the suspension models. Since none of the SUS models are not running close to their cycle computation limit, the move would merely be for aesthetics...