Attached are the oplev pitch, yaw, and sum trends for the last 7 days for all active H1 optical levers.

Hannah Fair, Stefan Ballmer

Some of the ASC and LSC ODC bits that were not in the master bit mask were occasionally triggering mid-lock, without any obvious data degradation.
I updated the thresholds listed below. Since the IFO is currently not locked, the SDF is currently very red.

THE SDF PROBABLY NEEDS TO BE UPDATED WITH THESE THRESHOLDS.

# ASC
ezca['ASC-ODC_REFL_A_DC_LT_TH'] = -150
ezca['ASC-ODC_REFL_B_DC_LT_TH'] = -150
ezca['ASC-ODC_REFL_A_DC_GT_TH'] = -1000
ezca['ASC-ODC_REFL_B_DC_GT_TH'] = -1000
ezca['ASC-ODC_REFLA_DC_PIT_LT_TH'] = 0.3
ezca['ASC-ODC_REFLA_DC_YAW_LT_TH'] = 0.3
ezca['ASC-ODC_REFLB_DC_PIT_LT_TH'] = 0.3
ezca['ASC-ODC_REFLB_DC_YAW_LT_TH'] = 0.3
ezca['ASC-ODC_CHARD_PIT_LT_TH'] = 1000
ezca['ASC-ODC_CHARD_YAW_LT_TH'] = 1000
ezca['ASC-ODC_DHARD_PIT_LT_TH'] = 3500
ezca['ASC-ODC_DHARD_YAW_LT_TH'] = 3500
ezca['ASC-ODC_PRC1_PIT_LT_TH'] = 2000
ezca['ASC-ODC_PRC1_YAW_LT_TH'] = 2000
# LSC
ezca['LSC-ODC_MICHCTRL_LT_EQ_TH'] =  300000
ezca['LSC-ODC_MICHCTRL_GT_EQ_TH'] = -300000

Old values:
ASC-ODC_REFL_A_DC_LT_TH -150.0
ASC-ODC_REFL_B_DC_LT_TH -300.0
ASC-ODC_REFL_A_DC_GT_TH -900.0
ASC-ODC_REFL_B_DC_GT_TH -750.0
ASC-ODC_REFLA_DC_PIT_LT_TH 0.2
ASC-ODC_REFLA_DC_YAW_LT_TH 0.2
ASC-ODC_REFLB_DC_PIT_LT_TH 0.15
ASC-ODC_REFLB_DC_YAW_LT_TH 0.15
ASC-ODC_CHARD_PIT_LT_TH 750.0
ASC-ODC_CHARD_YAW_LT_TH 750.0
ASC-ODC_DHARD_PIT_LT_TH 2500.0
ASC-ODC_DHARD_YAW_LT_TH 2500.0
ASC-ODC_PRC1_PIT_LT_TH 1500.0
ASC-ODC_PRC1_YAW_LT_TH 1500.0
LSC-ODC_MICHCTRL_LT_EQ_TH 150000.0
LSC-ODC_MICHCTRL_GT_EQ_TH -150000.0

Overview Meeting Notes:

• Weekend OPS Update:  noisy seismic, EQ recovery Monday morning, ETM ISI ringing up
• SEI update with HAM2/3 issues
• CDS:  Carlos came in over weekend due to server going down
• Kyle/VAC:  Move over to Y-arm (for bake work), Y-beam manifold ion pump
• Went over Work Permits
• Possibly moving OFI, H1 permitting

Tasks For Tomorrow's Maintenance 

• Fix phones (at out buildings) Richard
• Vacuum plumbing air for dust monitors for LVEA (Jeff)
• Survey of wifi routers, taking photos (Jeff)
• Server work (Jonathan/Ryan)
• Possible craning tcs over beamtube (Jodi/Alastair)
• Crane inspection of fastener sizes (Bubba)
• PBS install hwsX (Jason/Nutsinee)
• PEM, moving stuff for injections.  600-700Hz invest in CER.  (Robert)
• cdsf0 down to increase space (Carlos)
• EY hvac linkages/dampers (Bubba)
• SEI mid-range blend (Hugh/Jim)
• Possible software model change, to fix T240 bug (Hugh)
• Replace carpet this week (Bubba)

/* waffle, random thoughts & meanderings below */

Plots of the reference cavity and pre-modecleaner transmission for the past day.
slope of reference cavity transmission 0.27 mW/day
slope of pre-modecleaner transmission 110 mW/day

slope of QPDY 0.002 microns/day
slope of QPDX 0.003 microns/day

We should crunch some numbers to see if this is consistent with the beam change
out of the pre-modecleaner,  The laser output power actually fell over the same
time interval.  The diffraction average has decreased to suit.

Comparison of the cavity spots over the past week can be seen in AlignmentShift.gif.

TITLE:  12/7 DAY Shift:  16:00-00:00UTC (08:00-16:00PDT), all times posted in UTC     

STATE of H1:  DOWN & HAM2/3 ISIs with Guardian issues being looked at.

Outgoing Operator:  Patrick

Quick Summary:  useism still elevated (LVEA at 1um/s, but might be trending down slightly if you squint at it).  The earthquake band (0.03-0.1Hz  band looks like it's finally returned to normal levels at about 14:00utc (6amPST).  Hugh is working on HAM2/3 ISI recovery.  

IFO has been down for 20+hrs.

O1 day 80

model restarts logged for Sun 06/Dec/2015 No restarts reported

TITLE: 12/7 [OWL Shift]: 08:00-16:00 UTC (00:00-08:00 PDT), all times posted in UTC

STATE Of H1: Unlocked
SHIFT SUMMARY: Earthquakes tripped most of the watchdogs at the beginning of the shift. Brought everything back except the HAM2 ISI and HAM3 ISI which had guardian user code error messages. Hugh is investigating.
SUPPORT: Hugh
INCOMING OPERATOR: Corey

Ran into guardian user error code messages for HAM2 and HAM3 ISI. Have done some investigating but don't dare change anything. Suspect it may be related to changes reported in alog 23695.

I haven't found a way to get around these.

Noticed SDF differences related to the BS ISI stage 2 GS13. Clicking on LO cleared them.