WP11816 Add CAL GDS_HASH channel to DAQ and GDS Broadcaster

Jamie, Erik, Jonathan, Dave

A new channel, H1:CAL-CALIB_REPORT_GDS_HASH_INT, as added to the cal_hash_ioc EPICS IOC. It was added to the DAQ via EDC, and also added to the DAQ GDS-Broadcaster for transission to GDS.

The new channel is being monitored by the CDS SDF.

WP11821 New h1asc model

Jeff, Dave:

We installed Jeff's new h1asc model. DAQ restart was required for the addtion of 4 slow chanels.

WP11822 FMCS STAT upgrade

Erik, Dave:

Erik installed new FMCS STAT code. This also added new channels to the DAQ, requiring a DAQ+EDC restart.

DAQ Restart

Jonathan, Dave:

Jonathan made the recent GDS Broadcast channel additions permanent in puppet and regenerated the GDS channel lists.

We restarted the DAQ and EDC for the above changes. No issues with this restart.

TITLE: 04/23 Day Shift: 15:00-23:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Idle
OUTGOING OPERATOR: Oli
CURRENT ENVIRONMENT:
    SEI_ENV state: MAINTENNANCE
    Wind: 5mph Gusts, 3mph 5min avg
    Primary useism: 0.01 μm/s
    Secondary useism: 0.10 μm/s
QUICK SUMMARY: IFO lost lock a few hours ago and has been losing lock around transition to ETMX even though it isn't windy. I've put it into IDLE since maintance activities have already began.

Workstations were updated and rebooted.  This was an OS package update.  Conda packages were to affected.

TITLE: 04/23 Eve Shift: 23:00-07:00 UTC (16:00-00:00 PST), all times posted in UTC
STATE of H1: Observing at 150Mpc
INCOMING OPERATOR: Oli
SHIFT SUMMARY:

Lots of EQs from Taiwan today, only 1 lockloss from them. The range has been lower today, the high frequency squeezing doesn't look as good as usual.

Lock#1

• 21:18 UTC Observinghttps://ldas-jobs.ligo-wa.caltech.edu/~lockloss/index.cgi?event=1397866956
• 00:22 UTC lockloss

Lock#2

3 more EQs from Taiwan (4.5, 5.8, 5.2) came through while I was trying to relock.

LOG:                                                                                                                                                                                                         

Right click on an MEDM window, select Execute -> Search Model.

Then click on a channel.  A browser will pop up showing the design of the model that generates the channel.

Thanks to Takahiro Yamamoto for the code.

You might have to log out and log back in to see it.

We've been locked and observing for 1:40 following the lockloss at 00:22 UTC, range is lower this lock (High frequency SQZing doesn't look the best).

No obvious cause, https://ldas-jobs.ligo-wa.caltech.edu/~lockloss/index.cgi?event=1397866956

Closes FAMIS 26296

No big items to note.

The noisiest fan for the OUT buildings was MY_FAN2_270_1

The noisiest fan for the CS buildings were MR_FAN5_170_1

TITLE: 04/22 Day Shift: 15:00-23:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Observing at 158Mpc
INCOMING OPERATOR: Ryan C
SHIFT SUMMARY: Was able to relock this afternoon during a lull in earthquakes from Taiwan just in time for a candidate event to come in. BNS range is on the lower side; Camilla comments that SQZ doesn't seem to be tuned well.

• 20:00 - Taking over from Corey
• 20:22 - Seismic back to CALM, starting lock acquisition
• 21:15 - Reached NLN
• 21:18 - Started observing
• 21:35 - S240422ed
• 21:53 - EQ mode activated

LOG:

TITLE: 04/22 Eve Shift: 23:00-07:00 UTC (16:00-00:00 PST), all times posted in UTC
STATE of H1: Observing at 158Mpc
OUTGOING OPERATOR: Corey
CURRENT ENVIRONMENT:
    SEI_ENV state: CALM
    Wind: 8mph Gusts, 5mph 5min avg
    Primary useism: 0.03 μm/s
    Secondary useism: 0.10 μm/s
QUICK SUMMARY:

• Lots of earthquakes today
• We've been Observing for almost 2 hours, since 21:18 UTC

TITLE: 04/22 Day Shift: 15:00-23:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Observing at 157Mpc
INCOMING OPERATOR: Ryan C
SHIFT SUMMARY:

• Taiwan has been rumbling with M5+ earthquakes since 2am(local) & finally ended H1's run at just under 21hrs. 
• RyanS covered the afternoon part of shift.

LOG:

• 1445-1515 Optics lab cleaning (karen)
• 1515 EQ mode activated (M5.0,Taiwan)
• 1542 MY clean (karen)
• 1611-1722 PCal work (francisco)
  • 1635-1935 Tony in PCal Lab
• 1726 MY ladder inspections  (tyler)
• 1843 &1844 Incoming M6.1 earthquake alerts
• 1851 Lockloss due to Taiwan EQs
• 2000 Handing over to Ryan S.

Minutes before noon and before H1 would hit 22hrs, H1 lost lock most likely due to an earthquake(s) (M.6.1 to 6.6) from Taiwan although it's R-Waves are still inbound.  Taiwan has had multiple M5+ earthquakes since 2am (local) this morning!

Closes FAMIS#25988 last checked 77273

- HAM5 H3 has a slightly louder-than-normal peak at 60Hz.
- Stages 1&2 Vs for BS, ITMX, ITMY, and ETMX all have a peak around 16 Hz that is usually not there.
Everything else looks normal.

J. Kissel, J. Warner
WP 11821
ECR E2200226
IIET 12161

As Jim and others are starting to build up a good MEDM interface and otherwise use the rest of the HAM1 TT L4C feed-forward infrastructure I installed several moons ago (see 63115 and 63300), we've discovered that I overlooked adding useful test points at the summation point of the DC centering DOFS DC1 and DC2. These "FFHAM1_IN" and "FFTRGT_IN" fast test points, and corresponding EPICs readbacks were added to all the other summation points (CHARD, PRC1, REFLWFS_RF9_I, etc.), I just missed it for the DC centering loops.

Attached are screenshots after they're now in place.

We'll install these by recompiling, installing, and restarting the h1asc.mdl front-end model tomorrrow during maintenance.

FAMIS 20025

PMC REFL has been on the rise again for the past 5 days or so, perhaps lining up with a slight increase in the average PMC temp output? Unsure if these are related.

Mon Apr 22 10:12:09 2024 INFO: Fill completed in 12min 5secs

Gerardo confirmed a good fill curbside.