Richard, Fil, Dave, Carlos, Cheryl
The two digital GIGE cameras Cheryl installed on the PSL table are now producing images.
The cameras are called h1iogige1 (10.106.0.52) and h1iogige2 (10.106.0.53).
I have reconfigured h1digivideo2's VID-CAM28 and VID-CAM29 to be IO GIGE 1 and 2. For some reason monit had VID-CAM28 commented out, I reactivated this camera. I changed the MEDM screen to show the correct names (image attached).
GigEs were not connected to medm's until after the installation was complete, so the cameras were aligned without being able to see the images, and further alignment and more attenuation are needed.