caput H1:CAL-PCALX_PCALOSC4_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC5_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC6_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC7_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC8_OSC_SINGAIN 0

caput H1:CAL-PCALX_PCALOSC4_OSC_FREQ 33.43
caput H1:CAL-PCALX_PCALOSC5_OSC_FREQ 56.39
caput H1:CAL-PCALX_PCALOSC6_OSC_FREQ 77.73
caput H1:CAL-PCALX_PCALOSC7_OSC_FREQ 102.13
caput H1:CAL-PCALX_PCALOSC8_OSC_FREQ 283.91


caput H1:CAL-PCALX_PCALOSC4_OSC_SINGAIN 10
caput H1:CAL-PCALX_PCALOSC5_OSC_SINGAIN 10
caput H1:CAL-PCALX_PCALOSC6_OSC_SINGAIN 10
caput H1:CAL-PCALX_PCALOSC7_OSC_SINGAIN 20
caput H1:CAL-PCALX_PCALOSC8_OSC_SINGAIN 200

caput H1:CAL-PCALY_PCALOSC2_OSC_FREQ 450.03
caput H1:CAL-PCALY_PCALOSC2_OSC_SINGAIN 7000

caput H1:CAL-PCALY_PCALOSC2_OSC_FREQ 410.3
caput H1:CAL-PCALY_PCALOSC2_OSC_SINGAIN 5000

Reducing 17.1 Hz PCALY line amplitude back down from 5000 back down to 1000

- Change the actual PCAL frequency
- Change the actual PCAL amplitude

- Change the DARM loop notch
- Make a new model parameter set

- Change LO demod frequency 
    H1:CAL-CS_TDEP_PCAL_LINE2_COMPARISON_OSC_FREQ
- Change LO demod amplitude 
    H1:CAL-CS_TDEP_PCAL_LINE2_COMPARISON_OSC_CLKGAIN
- Change the demod band pass filter in all three PCAL, DARM_ERR, and DELTAL demods
    H1:CAL-CS_TDEP_PCAL_LINE2_PCAL_DEMOD_SIG_Name00
    H1:CAL-CS_TDEP_PCAL_LINE2_ERR_DEMOD_SIG_Name00
    H1:CAL-CS_TDEP_PCAL_LINE2_EXT_DEMOD_SIG_Name00
    
- Change the delay correction in the demod phase
    H1:CAL-CS_TDEP_PCAL_LINE2_PCAL_DEMOD_PHASE -9.888354
    (no need to phase adjustment of DARM_ERR demods or DELTAL demods)
    
- Install new EPICs Records
- change 
    H1:CAL-CS_TDEP_CAVITY_POLE_PCAL_FREQ

H1:CAL-CS_TDEP_CAVITY_POLE_PCAL_FREQ

Former phase for 410.3 Hz
H1:CAL-CS_TDEP_PCAL_LINE2_PCAL_DEMOD_PHASE -9.015381

Filter suggested for the updates to all three SIG banks in the PCAL DEMOD screen.
butter("BandPass",6,449.8,450.2)