Walked in to Maintenance recovery, and Jenne damped down roll/bounce modes to allow H1 to get to NLN.  Had one lockloss which was a bit of a mystery.

 

See some oscillations on the tidal StripTool of nuc1, and these correspond with notable oscillations on the EY & EX ISIs (see attached).  If the oscillations get worse, Nutsinee may try transitioning to having both 90mHz Blends on for each axis.

Seismically:  useism has slight upward trend over the last 24hrs & slightly breezy tonight (not over 20mph though).

 

o Rebooted opsws9

o EX lights are on

 

Shift Log:

• 1:22 RO Water Alarm
• 2:11 "Hardware injections stopped" Verbal Alarm (acknowledged shortly after)
• 2:21 Observing Mode
• 4:45 FMCS CS REHEAT MAJOR/HIGH Alarm
• 5:20 Lockloss
• 5:24 Cleared HEPI WD counters (Tues task from Shift Checksheet)
• 5:54 Observing