Jeff K., Edgard B.

We added DTT templates to measure the Open Loop gain of the L and P filters for the IM1 suspensions. We did this to investigate a potential miscalibration between the real filters and the ones obtained through GWFilt.  No mismatch was found after using the calibration described in G1100968.

_______________________________________________________________________

The templates live in the svn under:  /ligo/svncommon/SusSVN/sus/trunk/HAUX/H1/IM1/SAGM1/Data/

2018-08-16_H1SUSIM1_M1_WhiteNoise_Y_OLG_0p05to50Hz.xml
2018-08-16_H1SUSIM1_M1_WhiteNoise_P_OLG_0p05to50Hz.xml

NOTE: To use these templates, it is necessary to turn off the limiter for the output of the IM1 Damping loops filter bank.