After this morning's adventure with the ETMX UIM driver, and thanks to Richard's help to fix it, I could take UIM to test mass pitch and yaw transfer functions. Drivealign filters were then designed in the same manner as Keita with the measurements from this morning. The last two pdf show the filter design, with the filter in cyan.

They are now installed in the L1 P2P and Y2Y drivealign matrix filterbank with a gain of 1, but need to be tested.

UIM data used for the fitting are under the svn and located in :

/ligo/svncommon/SusSVN/sus/trunk/QUAD/H1/ETMX/SAGL1/Data
2014-03-20_H1SUSETMX_P2PY_WhiteNoise.xml
2014-03-20_H1SUSETMX_Y2PY_WhiteNoise.xml

Since the top mass P2P and Y2Y drivealign filters disappeared, I reinstalled them, and the first two pdfs are showing the design.